Triple Vitamin Nail Dip Tutorial
Always be sure that your clients have thoroughly washed their hands and use a nail brush to remove any dirt or debris under their nails.
We recommend using one of the following methods to prevent cross contamination of the nail dip powders.
Pour Over Method – explained at the bottom
Individual jar or bowl with a small amount of powder that is discarded and NOT used on another client.
We encourage you to check your local regulations and use Nail Dip Powder accordingly.
Step 1 Keratin Bond
Prep nail with a dry manicure by pushing back cuticles and lightly buffing the nail bed, only if needed.
Apply Triple Vitamin Step 1 Keratin Bond to clean natural nails.
Step 2 Base Coat
Apply Triple Vitamin Step 2 Fast Drying Base Coat to 3/4th of the nail, leaving the nail close to the cuticle uncoated.
Pro Tip: Do not allow the base coat to dry. After applying the base coat to a nail immediately proceed to Step 3 – Dip Nail In Clear Coat
TV804 Clear Dip Powder
Dip nails into Clear V804 Dip Powder and tap or brush off excess powder.
Step 2 Base Coat
Apply Triple Vitamin Step 2 Fast Drying Base Coat to the entire nail.
Pro Tip: Do not allow the base coat to dry. After applying the base coat to a nail immediately proceed to Step 5 – Dip Nail In Color Powder.
Dip nail into Triple Vitamin Nail Dip Powder of your choice, tap or brush off excess.
Step 2 Base Coat
Apply Triple Vitamin Step 2 Fast Drying Base Coat to the entire nail.
Pro Tip: Do not allow the base coat to dry. After applying the base coat to a nail immediately proceed to Step 5 – Dip Nail In Color Powder.
Dip nail into Triple Vitamin Nail Dip Powder of your choice, tap or brush off excess.
Pro Tip: Use quick gentle dips to prevent thick uneven coats.
Step 3 Activator
Apply Triple Vitamin Step 3 Activator over powdered nails. Let air dry for 1-2 minutes. Buff and File the nails to ensure a smooth surface.
Step 3 Activator
Again.
Apply Triple Vitamin Step 3 Activator over the nails. Let air dry for 1-2 minutes.
Pro Tip: Use a thin coat to prevent cracking of your nail color.
Wipe the nails with lint free wipes to remove any residue.
Step 4 Top Coat
Finally, apply Triple Vitamin Step 4 Top Coat, let air dry. Repeat and Wash hands.
Pro Tip: Wipe your brush on a lint free swab before returning it to the bottle to prevent the activator residue from hardening your top coat and brush.
Step 5 Cuticle Oil
Use Triple Vitamin Step 5 Serum Cuticle Oil to maintain and nourish healthy cuticle area.
Step 6 Brush Restorer
Dip brush into Triple Vitamin Step 6 Brush Restorer to ensure your brush is clean and to extend the use of your brushes.